|
Dymension® Surface Mount Manifold Valves
Incorporating FlareMount™ Sealing Technology
 |
| • |
Dymension® surface mount valve manifolds incorporate tongue & groove and FlareMount™ technology, a modular method of mounting valves to a manifold block using proven Flaretek® fitting sealing technology. |
| • |
The surface mount method enables you to replace or change a single valve as needed, lowering your cost of ownership. |
| • |
FlareMount™ sealing technology provides a robust, leak-free seal without introducing additional parts like gaskets and o-rings. |
| • |
Surface mount manifolds are available with a dual FlareMount™ interface. This dual sealing technology has integral inlet and outlet ports that redirect fluid into the manifold block without seals, gaskets or o-rings. |
| • |
Manifold blocks are available in PFA or proprietary HyQ® PTFE, providing chemical resistance and high purity fluid handling. |
| • |
Small footprint saves valuable equipment space. |
| • |
Numerous actuators are available to maintain flexibility in your design. Valve options include: pneumatic and manual, normally closed, normally open, restricted actuation, check, needle, fixed bypass and mixing. |
|
Dymension® valve manifolds are built to your specifications. Contact your local Entegris distributor or Entegris, Inc. with your configuration requirements. The following information is necessary to design your custom manifold:
| • |
P&ID schematic detailing the desired flow path and valve function |
| • |
Chemical media description |
| • |
Inlet and outlet pressures |
| • |
Media temperature |
| • |
Connection port size |
Upon receipt of this information, a concept drawing is created and provided to you for approval prior to placing an order. A part number is assigned at the time of order.
Quick-turn Service
Entegris provides a Quick-turn Service for manifold prototyping. This program supports your development cycle design iterations with fast prototype turnaround. Please contact your local Entegris distributor or Entegris, Inc. for more information on our Quick-turn Service.
An example of a surface mount manifold with single and dual FlareMount™ seals
Click to enlarge
Click to enlarge
An example of a surface mount manifold with single FlareMount™ seal
| Port Connection |
Dimension A |
| 1/4" Flaretek® |
2.52" (64.0 mm) |
| 3/8" Flaretek® |
2.59" (65.8 mm) |
|
| Temperature range: |
73° to 122°F (23° to 50°C), ambient
70° to 212°F (21° to 100°C), fluid |
| Media pressure (SG Platform) at: |
|
| |
70°F (21°C) |
Inlet 80 PSIG (552 kPa) |
| |
|
Outlet 40 PSIG (276 kPa) |
| |
212°F (100°C) |
Inlet 40 PSIG (276 kPa) |
| |
(PFA manifold bodies only) |
Outlet 20 PSIG (138 kPa) |
| Pneumatic supply pressure: |
|
| |
SG platform |
50 PSIG (335 kPa) minimum to 70 PSIG (483 kPa) maximum |
| |
Stack platform |
50 PSIG (335 kPa) minimum to 90 PSIG (621 kPa) maximum |
| Pneumatic supply port: |
10-32 UNF (M5) up to 1/4" |
| Materials: |
All wetted parts are PFA and PTFE. Exterior actuator parts are PVDF or PVC, fasteners are stainless steel. Interior actuator parts are PVDF, stainless steel and Viton®. |
|
 Download and View the Flaremount™ Technology Assembly Procedures in Adobe PDF format.
You will first need to have the Adobe Acrobat Reader ActiveX control or plug-in installed on your computer.
|
;)
;)
;)
;)
